The WSERD40B motor has internal lithium rechargeable batteries with approximately 6-12 months of average use between charges. It can be used on blinds up to 10ft x 10ft.
The fittings for this motor will allow it to be used with a range of tube sizes from 40-50mm in diameter. All of the charging intelligence is taken care of inside the motor. The motor will indicate both when charging is required, and completed. It cannot be overcharged and it will not start to discharge when the batteries are full as other brands may do. The charger plugs directly into the motor head so there is no need for an unsightly charging cable.
- ALDC charger required
- (Charger comes with 13ft cable, 10ft cable also available)
| 12 Volt DC | Type 5/28 |
|---|---|
| Rated Torque (N.m) | 5 |
| Output Speed (rpm) | 28 |
| Nominal Consumption (W) | 42 |
| Nominal Voltage (V) | 12 |
| Nominal Current (A) | 3.5 |
| Protection Index (IP) | IP44 |
| Total Length (in) | 24 |
| Maximum Turns | infinity |
| Net Weight (lb) | 3 |
